Everything about all models of the MP-Series

Manual Multiplayer 22, 44, 88(W)

Manual MP22, MP44, MP88(W): mpmanual.pdf

Manual Supplements - new Functions
Version 4.00 to 4.04 v404engl.txt
Version 4.05 to 4.10 v410engl.txt
Version 4.2x v420engl.txt
Version 4.30 v430engl.txt


MP44 - first Model
Handbuch MP44 (old): MP44 manual
MP-44 (old) utilities. Unzip file and copy onto empty disk. Operating instructions are in readme.txt Datei. mp44utilities.zip
(german)

OS for Multiplayer, Version 4.412

Error Promts MP-Series

In case you get an SCSI error message on the display, please inquire in the following file attached. scsierrors.pdf

Problems with the Multiplayer?

Here you can find quick solutions to the most frequent problems on the MP-22 / 44 / 88 (W). mpprobleme.pdf (german)

Installation MP3 - Board

Which board for which player? (MP-W - series); Installation instructions for the various models.
Operating instructions MP3-Board: bedienungshinweisemp3board.pdf (german)
Installation MP3-Board: mp3einbauanleitung.zip (german)

Installation Karaoke - Board

einbaukaraoked.pdf (german)

OS for the Multiplayer, Version 4.412

Important notice:
The update operation will cause the device to initialize and to clear all user-defined settings such as matrix programs, I/O names etc., so do not update your device until you have saved all your work to a disk! On MP-88, you will also have mount the SCSI harddisk again by using the Device Drive Manager's INS-function. Of course, all data on the drive will remain unchanged by the update operation!

Updating of Multiplayers
All Multiplayer devices (letter "W" appears in the device name) are equipped with a FLASH-EEPROM, which allows to simply load the new operating system version from floppy disk. Please download the appropriate file and copy it to a floppy disk. Then insert this disk into the floppy disk drive of your Multiplayer and call up the function "Update Operating System" (UPD) from Device Configuration Menu. Select the new OS-file from the floppy disk's directory and press ENTER.
After loading data, the device will show "Programming FLASH EEPROM..." for about six seconds. DO NOT TURN OFF the device during that time!
The device will reset and display the new OS-Version number before it enters it's normal operation mode again.

Updating of MP-88
All MIDI Players MP-88 with operating system versions prior to 2.05 are not equipped with a FLASH-EEPROM yet. You may upgrade it by installing a small board, called "Flash ROM Upgrade" instead of the standard EPROM chip. This is nearly as simple as replacing an EPROM chip and can easily be done by yourself. Once this upgrade kit has been installed, any update operations are as simple as described for the MultiPlayers. Please contact your local dealer for obtaining a Flash ROM Upgrade for your MP-88.
Generally, all MP-88 with OS-version 3.x or higher are already equipped with a Flash ROM.
If you are not sure, whether or not your MP-88 is equipped with a Flash-ROM already, call up the UPD function. You'll get the message: "Sorry - unable to program the installed type of ROM" if there is no Flash ROM installed yet.

Devices with FORNET
The listed updates are exclusively for devices without the FORNET option. In case of a device with FORNET please request an update file from thomas@miditemp.de and please do not forget to specify your device type.



Revision History of MIDITEMP Operating Systems
revhismp.pdf

(C) 2006 - All rights reserved

Print this page